TRM's family of custom broadband antenna element dipoles are designed for use in antenna arrays for VHF & UHF bands. The baluns shown are examples of customer specific solutions. Other impedance ratios are available from 50 ohms balanced to 50 ohms unbalanced through 200 ohms balanced to 50 ohms unbalanced. Ferrite & Microstrip Construction.

TL501005, 20 - 240 MHZ

The TL501006 is a broadband feed to an antenna element dipole used in an array and is suitable for the UHF band. A 50 ohm unbalanced transmission line is translated into the 100 ohm balanced line that the antenna feed requires. Other impedance ratios are available from 50 ohms balanced to 50 ohms unbalanced through 200 ohms balanced to 50 ohms unbalanced. Ferrite & Microstrip Construction.

Features:

  • Multi-Octave Bandwidth
  • Custom Amplitude and Phase Tapers
  • Rapid Custom Design

TL501006, 200 - 500 MHZ

The TL501006 is a broadband feed to an antenna element dipole used in an array and is suitable for the UHF band. A 50 ohm unbalanced transmission line is translated into the 100 ohm balanced line that the antenna feed requires. Other impedance ratios are available from 50 ohms balanced to 50 ohms unbalanced through 200 ohms balanced to 50 ohms unbalanced. Ferrite & Microstrip Construction.

Features:

  • Multi-Octave Bandwidth
  • Custom Amplitude and Phase Tapers
  • Rapid Custom Design

TL5065, 200 - 1050 MHZ

The TL5065 is a broadband feed to an antenna element dipole used in an array and is suitable for UHF and L band. A 50 ohm unbalanced transmission line is translated into the 100 ohm balanced line that the antenna feed requires. Other impedance ratios are available from 50 ohms balanced to 50 ohms unbalanced through 200 ohms balanced to 50 ohms unbalanced. Ferrite & Microstrip Construction.
 

Features:

  • Multi-Octave Bandwidth
  • Custom Amplitude and Phase Tapers
  • Rapid Custom Design

STRATEGIC CUSTOMERS

STRATEGIC CUSTOMERS