Return to 2-Way Ferrite Transformer Dividers DL22030

2-Way // 2-Way Ferrite Transformer Dividers

DESCRIPTION:

The DL22030 broadband ferrite 2-way power divider is ideal for a wide range of wireless radio frequency microwave applications ranging from amplifier combining & receiver dividing to antenna splitting, and is suitable for networks from VHF to S band.Lumped element design provides for low loss and optimal isolation at incremental frequencies within the 20-3000 MHz band.

FEATURES:

  • High Isolation
  • Low Loss
  • In-Line Configuration
  • Standard SMA Connectors (N, BNC, TNC optional)

ELECTRICAL PROPERTIES

Freq Range
MHz
Insertion Loss
(dB Max.)
Isolation
(dB Min.)
VSWR In
(Max.)
VSWR Out
(Max.)
Amp Bal
(dB Max.)
Phase Bal
(Deg. Max.)
Input Power
(Watts Max.)
20-3000 2 18 1.5:1 1.5:1 ±0.5 ±4 1

MECHANICAL SPECS:

Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30'.
Temperature: Units designed to operate –40° to +85° C.

SCHEMATIC

Click here for DL22030 schematic
DL22030

TRM Microwave’s quality management system has been certified by Intertek Testing Services NA Inc. to the ISO 9001:2008 standard and complies with legacy military standards MIL-I-45208A and MIL-Q-9858. View our certificate

STRATEGIC CUSTOMERS

STRATEGIC CUSTOMERS